深圳市泰联宏电子有限公司  

加关注0

PCFN-124D2M,000
TE 内部编号： 1461193-9
产品亮点 浏览所有
产品系列 = PCF
Contact - Current Class = 20A to 30A Class, Greater Than 16A
触点额定电流 = 25 A
端子类型 = PCB-THT
触点组合形式 = 1 Form A (NO)
电气特点
Contact - Current Class 20A to 30A Class, Greater Than 16A
触点额定电流 (A) 25
Contact - Limiting Continuous Current (A) 25
Contact - Limiting Making Current (A) 25
Contact - Limiting Breaking Current (A) 25
Insulation - Initial Dielectric Between Coil/Contact Class >4000V Class
Insulation - Initial Dielectric Between Open Contacts (V rms) 1000
介电强度 － 线圈接触体 (V rms) 5000
Contact - Rated Voltage (VAC) 277
Contact - Rated Voltage (VDC) 24
Contact - Limiting Short-Time Current (A) 25
Contact - Switching Recommended Load, Min. 100mA at 1V
线圈电压 (VDC) 24
线圈电阻 (?) 640
额定线圈功率 (mW) 900
Coil - Rated Power Class 800mW to 1000mW Class
Insulation - Initial Insulation Resistance (M?) 1000000
Insulation - Creepage Class 5.5mm to 8mm Class
Insulation - Clearance Class 5mm to 8mm Class
FCC 68 绝缘认证 8000V Initial Surge Withstand Voltage between Contacts and Coil
尺寸
Mechanical - Length Class 30mm to 35mm Class
长度 (mm [in]) 30.40 [1.197]
Mechanical - Width Class 12mm to 16mm Class
宽度 (mm [in]) 16.00 [0.630]
Mechanical - Height Class 25mm to 30mm Class
高度 (mm [in]) 26.50 [1.043]
Insulation - Clearance Between Contact and Coil (mm [in]) 6.7 [0.264]
Insulation - Creepage Between Contact and Coil (mm [in]) 8 [0.315]
主体特性
安装方式 PCB
重量 (g [oz]) 28.00 [0.988]
触点特性
端子类型 PCB-THT
Contact Material AgSnO
Contact - Number of Poles 1
配置特性
触点组合形式 1 Form A (NO)
线圈励磁系统 Monostable, DC
行业标准
符合RoHS/ELV标准 符合RoHS标准, 符合ELV 标准
无铅焊接制程 波峰焊最高可达260°C, 波峰焊最高可达240°C, 波峰焊最高可达265°C
RoHS/ELV 符合记录 改为符合 RoHS 指令
Approved/Registered Standards CQC, UL, TUEV


PCFN-106D2M PCFN-109D2M PCFN-112D2M PCFN-124D2M